สถานีการอุ่นแม่พิมพ์แก้วล่วงหน้า

Mon, 08 Jun 2026 03:37:35 +0800

Out on the line, waiting for a mold to come up to temperature eats minutes and sets you up for glass breakage. A cold or unevenly heated tool drives thermal shock, bow, and optical distortion—scrap that shows up hard in your yield reports. We built the glass mold preheat station to cut out that wait and even out the thermal front before the glass ever touches the tool. What matters under the hood We use short-wave infrared quartz emitters for fast, direct radiant heat—quick response, tight zone control. Power is matched to your process: 2–6 kW per module, 240/400 V, a footprint that fits common press and bender tooling, and terminals that stand up to plant wiring. Control is PID with thermocouple feedback right at the mold surface, holding setpoint within ±3 °C. The payoff is a uniform thermal field that keeps thermal stress off the glass and keeps the mold surface stable shift after shift. Why this lands in real production In tempering, a stable mold temperature cuts roller-mark defects and eases edge stress, which improves optical quality and gives you more margin on breakage. In bending, uniform heating prevents local sag and keeps droop repeatable, so setups come in faster. For EVA/SGP/PVB lamination, the station brings the stack to the right starting point quickly, shortening the autoclave cycle and lowering gas consumption. For insulating glass sealing, it keeps the primary seal consistent, which tightens up edge-seal integrity. Energy use is trackable: you typically see 20–40% reductions on preheat cycle time, with fewer mold-related scrap events. The details that keep it running Installation is straightforward, but the station has to match the mold’s emissivity and geometry. Reflective tool surfaces can need shielding, or a different emitter layout. Keep the quartz zones clean—dust and overspray drop efficiency and shorten emitter life. After a cold start, budget 10–15 minutes to hit setpoint, and expect a bit longer after a tool change. Spec the station to your press or bender footprint, and we can align connectors and mounting to your OEM layout so it drops in clean.

สถานี on Professional Patio Heating

สถานีการอุ่นแม่พิมพ์แก้วล่วงหน้า